Figure 46
The following sections explain the Modify Drive Group Wizard options.
Adding a Drive or Drives to a Configuration
Caution:
Follow these steps to add a drive or drives to a configuration with the Modify Drive Group Wizard.
1. Click the Logical tab in the left panel of the MegaRAID Storage Manager main menu.
2. Select a drive group in the left panel of the window.
3. Either select Go To->Drive Group->Modify Drive Group on the menu bar, or right-click the
virtual drive icon to access the Modify Drive Group Wizard.
The Modify Drive Group Wizard appears.
4. Select the RAID level that you want to change (migrate) the drive group to and click Next.
The following dialog appears. It lists the drives you can add and it states whether you have
to add a minimum number of drives to change the RAID level from the current level to the
new RAID level.
Page 60
Configuration
DB09-000202-05 37857-02
Rev. F - May 2011
Modify Drive Group Wizard
Be sure to back up the data on the virtual drive before you add a drive to it.
Copyright © 2011 by LSI Corporation. All rights reserved.