The server profile information is displayed, as shown in the following figure.
Figure 13
Parity Size
Parity size is used for storing parity information on RAID 5, RAID 6, RAID 50, and RAID 60 virtual
drives.
Follow these steps to view the Parity Size.
1. In the Logical view, click the Virtual Drive node.
2. For RAID 5, RAID 6, RAID 50, and RAID 60, the parity size is displayed as shown in the
following figure.
Figure 14
Page 30
Startup and Main Windows
DB09-000202-05 37857-02
Rev. F - May 2011
Server Profile View of a Drive in Shield State
Parity Size
Copyright © 2011 by LSI Corporation. All rights reserved.