Table of Contents
Advertisement
•
Manage Snapshots
•
Editing Schedule
•
Advanced Settings
•
Create View Using Manage Snapshots Wizard
•
Viewing Snapshot Details
•
No View Details for Snapshot
•
No Snapshot Schedule
•
Graphical Representation of Repository Virtual Drive
•
Deleting a Snapshot
•
Disabling MegaRAID Recovery
•
CacheCade - SSD Caching Advanced Software Option
Enabling the Recovery Advanced Software
You can enable the Recovery advanced software in the MegaRAID Storage Manager software.
When you enable Recovery, you create two virtual drives, one as a Snapshot Base or a source
and the other as a Snapshot Repository. The base virtual drive contains the data that is stored in
the repository virtual drive.
Follow these steps to enable MegaRAID Recovery.
1. Click the Logical tab on the main menu window for the Logical view.
2. Select and highlight a virtual drive from the list of virtual drives.
This virtual drive is the Snapshot Base virtual drive.
Note:
3. Select Go To -> Virtual Drive -> Enable MegaRAID Recovery on the menu bar, as shown
in the following figure.
Page 110
Using the MegaRAID Advanced Software
DB09-000202-05 37857-02
Rev. F - May 2011
A base virtual drive and a repository virtual drive can be associated with the same
drives or a common set of drives, or the two virtual drives can be located on two
completely separate set of drives. Using a separate set of drives for the base virtual
drive and the repository virtual drives provides a performance advantage over using
a common set of drives.
Copyright © 2011 by LSI Corporation. All rights reserved.
Advertisement
Table of Contents
