LSI X79 Extreme11 User Manual page 163

Table 3
Number
0x00dd
0x00de
0x00df
0x00e0
0x00e1
0x00e2
0x00e3
0x00e4
0x00e5
0x00e6
0x00e7
0x00e8
0x00e9
0x00ea
0x00eb
0x00ec
0x00ed
0x00ee
0x00ef
0x00f0
0x00f1
0x00f2
0x00f3
0x00f4
0x00f5
0x00f6
0x00f7
0x00f8
0x00f9
Events and Messages
DB09-000202-05 37857-02 Rev. F - May 2011
Event Messages (Cont.)
Severity
Level Event Text
Warning NVRAM is corrupt; reinitializing
Warning NVRAM mismatch occurred
Warning SAS wide port %d lost link on PHY %d
Information SAS wide port %d restored link on PHY %d
Warning SAS port %d, PHY %d has exceeded the allowed error rate
Warning Bad block reassigned on %s at %lx to %lx
Information Controller Hot Plug detected
Warning Enclosure %s temperature sensor %d differential detected
Information Drive test cannot start. No qualifying drives found
Information Time duration provided by host is not sufficient for self check
Information Marked Missing for %s on drive group %d row %d
Information Replaced Missing as %s on drive group %d row %d
Information Enclosure %s Temperature %d returned to normal
Information Enclosure %s Firmware download in progress
Warning Enclosure %s Firmware download failed
Warning %s is not a certified drive
Information Dirty cache data discarded by user
Information Drives missing from configuration at boot
Information Virtual drives (VDs) missing drives and will go offline at boot: %s
Information VDs missing at boot: %s
Information Previous configuration completely missing at boot
Information Battery charge complete
Information Enclosure %s fan %d speed changed
Information Dedicated spare %s imported as global due to missing arrays
Information %s rebuild not possible as SAS/SATA is not supported in an array
Information SEP %s has been rebooted as a part of enclosure firmware download. SEP will be
unavailable until this process completes.
Information Inserted PD: %s Info: %s
Information Removed PD: %s Info: %s
Information VD %s is now OPTIMAL
Copyright © 2011 by LSI Corporation. All rights reserved.
Page 163