LSI X79 Extreme11 User Manual page 18

•
Restart: # svcadm restart svc:/application/management/sma:default
•
Status: # svcs svc:/application/management/sma:default
Note:
The following commands are used to start, stop, restart, and check the status of the SAS SNMP
Agent daemon:
•
Start: #/etc/init.d/lsi_mrdsnmpd start
•
Stop: #/etc/init.d/lsi_mrdsnmpd stop
•
Restart: #/etc/init.d/lsi_mrdsnmpd restart
•
Status: #/etc/init.d/lsi_mrdsnmpd status
Configuring snmpd.conf
By default, the SNMP queries (walk, get) can be executed from any remote machine without any
changes to the snmpd.conf file. To quickly add a new community and client access, perform the
following steps:
1. Stop the SMA service by executing the following command:
# svcadm disable svc:/application/management/sma:default
2. Add read-only and read-write community names.
a. Add a read-only community name and client/hostname/ipaddress under "SECTION:
b. Add a read-write community name and client/hostname/ipaddress under "SECTION:
3. Start the SMA service by using the following command:
Page 18 Installation
DB09-000202-05 37857-02 Rev. F - May 2011
Online indicates that the SMA is started. Disabled indicates that the SMA is
stopped.
Access Control Setup" in the /etc/sma/snmp/snmpd.conf file, as shown in the following
excerpt:
#################################################
# SECTION: Access Control Setup
#This section defines who is allowed to talk to your # running SNMP Agent.
# rocommunity: a SNMPv1/SNMPv2c read-only access
# community name
# arguments: community
# [default|hostname|network/bits] [oid]
# rocommunity snmpclient 172.28.157.149
#################################################
Access Control Setup" in the /etc/sma/snmp/snmpd.conf file, as shown in the following
excerpt:
#################################################
# SECTION: Access Control Setup
# This section defines who is allowed to talk to your # running
# snmp agent.
# rocommunity: a SNMPv1/SNMPv2c read-only access
# community name
# arguments: community
# [default|hostname|network/bits] [oid]
# rwcommunity snmpclient 172.28.157.149
#################################################
Copyright © 2011 by LSI Corporation. All rights reserved.