Table of Contents
Advertisement
Figure 34
The JBOD Drives box displays the available JBOD drives available in the system.
2. Select the drives which you want configured as Unconfigured Good and then click Convert.
Clicking on Convert configures the selected JBODs to Unconfigured Good Drives.
Note:
3. Click Next.
The Create Virtual Drive screen appears as shown in
Converting JBOD to Unconfigured Good from the MegaRAID Storage Manager Main Menu
You also can convert JBOD to Unconfigured Good by clicking the Controller->Make Configured
Good option from the MegaRAID Storage Manager main menu window.
The Make Configured Good dialog appears as shown in the following figure.
Page 50
Configuration
DB09-000202-05 37857-02
Rev. F - May 2011
JBOD Drives
If you do not want to make any JBOD as Unconfigured good drive(s), select the
checkbox Do not convert JBOD drives to unconfigured good drives. The
MegaRAID Storage Manager application does not change any selected JBODs to
unconfigured good drives.
Copyright © 2011 by LSI Corporation. All rights reserved.
Figure
24.
Advertisement
Table of Contents
