Turning Remote Diagnosis On/Off ("Remote Diagnosis" Setting) - Kyocera KM-1650 Operation Manual

Turning Remote Diagnosis ON/OFF ("Remote Diagnosis" setting)

Especially if trouble occurs in this fax in which it is necessary to call for service, it is possible for our
service center computer to access the fax directly over the telephone line and check its status and
other information about the trouble.
Notes
•
•
1 Press the System Menu key.
2
Press the
3 Press the Enter key.
4 Press the
Diag.[Remote diagn.].
5
Press the Enter key.
6 Press the
Remote Diagnosis ON or OFF.
The asterisk (*) in the message display indicates the
current setting.
7 Press the Enter key. The setting for Remote Diagnosis is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
To use Remote Diagnosis, it is necessary to enter into a contract with an authorized service
center in advance and also to register a predetermined Remote Test ID in advance. (See
Registering the Remote Test ID ("Remote Test ID" setting) on page 7-18.) For further
information, contact your service representative, an authorized service center or the place of
purchase.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key to select Fax Default.
key or the key to select Remote
key or the key to select whether to turn
Various Settings and Registration
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
F-NET
Dest. List Tag
Remote Diag.
Remote Diag.:
*
On
Off
:Off
:Alphabet
:On
7-17