Remote Diagnosis - Kyocera KM-2560 Operation Manual

Setup and Registration

Remote Diagnosis

7-12
If a problem arises with this machine and you contact our service
representative, this feature enables our Service Center computer to
access the machine over the phone and check the machine's status or look
for problems.
NOTE:
To use Remote Diagnosis, you must first sign an agreement with
our service representative and register a preset ID on the machine. For
more information, contact your Service Representative or Authorized
Service Center.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of TX/RX Common and then [Change] of FAX

Remote Diagnosis.

3 Select either [Off] or
[On].
If you selected [On],
press [+] or [-] or use
the numeric keys to
enter the preset ID.
4 Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
FAX/i-FAX - FAX Remote Diagno sis
Autho rize the access for Remote Diagnosis from the service representative.
* Use [-]/[+] or the numeric keys to enter the predetermined ID.
Off
On
Status
ID(0000 - 999 9)
0000
Cancel OK
6/6/2006 10:00
OPERATION GUIDE