Compaq ProLiant 6400R Maintenance And Service Manual page 55

2-38 Compaq ProLiant 6400R Maintenance and Service Guide
5. Press the top of the appropriate expansion board slot release lever
6. Rotate the lever toward the rear of the expansion board slot
7. Holding the board at each end, carefully rock it back and forth until the connectors pull
free from the slot.
8. Remove the PCI expansion board
NOTE: Figure 2-34 shows the removal of a network interface card (NIC).
Figure 2-34. Removing a PCI Hot Plug expansion board
Reverse steps 1 through 8 to replace a PCI Hot Plug expansion board.
.

3
.


.

1
2