Compaq ProLiant 6400R Maintenance And Service Manual page 123

3-56 Compaq ProLiant 6400R Maintenance and Service Guide
Booting into the Operating System
When you enable ASR-2 to restart into the operating system and a critical error occurs, ASR-2
logs the error in the Critical Error Log or IML and restarts the server. The system ROM pages
the designated administrator, and then executes the normal restart process.
IMPORTANT: When you enable ASR-2 to restart into the operating system, Modem Dial-In Status,
Network Status, and Modem Dial-Out Status are automatically disabled. In this mode, ASR-2 can page
you if a critical error occurs, but you cannot access the server, and the server cannot dial out to a remote
workstation.
If the ASR-2 feature cannot restart the server within 10 attempts, it logs a critical error in the
Critical Error Log or IML, restarts the server into the Compaq Utilities, and puts the modem
into auto-answer mode.
The System Configuration Utility setting should resemble the following when you enable ASR
to restart into the operating system.
Option
Serial interface
Dial-in status
Dial-out status
Dial-out string
Network status
Network protocol
Network controller
Network host name
Network card slot
Network frame type
Network IP address
Network IP net mask
Network IP router address
Table 3-22
Operating System Restart SCU Setting for ASR-2
Setting
COM1
Disabled
Disabled
555-1234
Disabled
IPX
Compaq
CPQHOU
Slot #
ETHERNET_II
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx