Switches; Maintenance Configuration Switchbank (Sw1); Maintenance Configuration - Compaq ProLiant 6400R Maintenance And Service Manual

Switches

Maintenance Configuration Switchbank (SW1)

The maintenance configuration switchbank (SW1) is located on the peripheral board. The
following figure shows the location and default switch settings for the ProLiant 6400R server
maintenance configuration switchbank for ProLiant servers with the external hot-plug redundant
system fan assembly.
Figure 4-6. Location and default setting for the maintenance configuration switch (SW1)
Switch
1
2
3
4
5
6
Note: The "On" position activates the function.
* Earlier versions of the ProLiant 6400R server equipped with a single rear CPU fan have this switch in the On
position.
on
1 2 3 4 5 6
Maintenance Configuration Switchbank (SW1) Settings
Default Function
Off On-board video disable
Off Configuration lock
Off * External hot-plug redundant system fan assembly uninstall
Off Diskette boot override
Off Boot password disable
Off Clear configuration contents
Connectors, Switches, and LED Indicators 4-7
Table 4-6