Nc3131 Fast Ethernet Nic 64 Pci Dual Base10/100 Controller - Compaq ProLiant 6400R Maintenance And Service Manual

5-6 Compaq ProLiant 6400R Maintenance and Service Guide
Table 5-5
24X or Higher Low-Profile CD-ROM Drive Specifications
Stop time
Laser parameters
Type
Wave length
Divergence angle
Output power
Operating conditions
Temperature
Humidity
NC3131 Fast Ethernet NIC 64 PCI Dual Base10/100
Controller
NC3131 Fast Ethernet NIC 64 PCI Dual Base10/100 Controller Specifications
Network interface
Capability
Data transfer method
Network transfer rate
10 Base-T (half-duplex). 10 Base-2
10 Base-T (full-duplex)
100 Base-TX (half-duplex)
100 Base-TX (full-duplex)
Connector
I/O address and interrupt
Cable support
10 Base-TX
100 Base-TX
OS driver support
continued
< 4 seconds
Semiconductor laser GaAIAs
780 nm +/- 25 nm
53.5 degrees +/- 1.5 degrees
0.14 mW
5° to 45°C (41° to 113°F)
10 percent – 80 percent
Table 5-6
10 Base-T/100 Base-TX
IEEE 802.3/802.3u Compliant
32-bit/64-bit bus-master PCI
10 Mbit/s
20 Mbit/s
100 Mbit/s
200 Mbit/s
Dual RJ-45
Automatic configuration
Categories 3, 4, or 5 UTP (2 or 4 pair); up to
100 meters (328 feet)
Category 5 UTP (2 pair)
Novell NetWare Server v 3.11, 3.20, 4.x, and 5.x;
Windows NT 3.51 and 4.0; OS/2 Warp Server;
SCO Open Server 5.x and UnixWare v 2.x, SCO 7.x