Compaq ProLiant 6400R Maintenance And Service Manual page 53

2-36 Compaq ProLiant 6400R Maintenance and Service Guide
To remove a PCI Hot Plug expansion board:
1. Unlock and open the PCI Hot Plug access door.
Figure 2-32. Opening the PCI Hot Plug access door
2. Before removing a PCI Hot Plug Expansion Board, check the PCI Hot Plug LED to see
the status of the slot in which the PCI expansion board is seated. The slot LED should be
green. See Chapter 4, "Connectors, Switches, and LEDs" for further information on
PCI Hot Plug LEDs.
WARNING: A risk of injury or damage to the equipment exists from hazardous energy. The
hot-plug access door provides access to hazardous energy circuits. The door should remain
locked during the normal operation or the server should be installed in a controlled location
where only qualified personnel have access to the server.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.