Compaq ProLiant 6400R Maintenance And Service Manual page 119

3-52 Compaq ProLiant 6400R Maintenance and Service Guide
If the server continues experiencing
hardware or software errors and the
number of ASR cycles exceed the
specified number of recovery
attempts, the server logs an error to
the Server Health Log or the IML and
boots the Compaq Utilities from the
system partition on the hard drive.
Figure 3-1. ASR-2 flow chart
Hardware or software error occurs.
Error is recorded in the Critical Error
Log or the IML, depending on the
If a modem is installed and paging is
Notification pager alert is sent to the
|
Unattended server starts the
operating system.

|
server configuration.
|
Operating system halts normal
operation.
|
ASR timer expires.
|
Server is reset.
|
enabled, the Server Failure
Server Administrator.
Or Server starts Compaq Utilities from
the modem on auto-answer so that
the server administrator can dial in
(with a third-party terminal emulator
the system partition on the
hard drive.
|
If a modem is installed, ASR puts
software) to run the Compaq
Utilities remotely to identify the
source of the fault.
|
Or
|
Local Server Administrator runs
Compaq Utilities from the server
console to identify the source of
the fault.