Vlan Tagging; Vlan Association Subnet - NETGEAR ProSafe GSM7228PS Cli Manual
7200 series managed switch cli refernce manual for software version 8.0.3
Hide thumbs
Also See for ProSafe GSM7228PS:
- Cli manual (788 pages) ,
- Software administration manual (486 pages) ,
- Datasheet (15 pages)
Table of Contents
Advertisement
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The vlan-list contains VlanId's in range <1-4093>. Separate non-
consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range.
Format
vlan tagging <vlan-list>
Mode
Interface Config
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The vlan-list contains VlanId's in
range <1-4093>. Separate non-consecutive IDs with ',' and no spaces and no zeros in between the
range; Use '-' for range.
Format
no vlan tagging <vlan-list>
Mode
Interface Config
vlan association subnet
This command associates a VLAN to a specific IP-subnet.
Format
vlan association subnet <ipaddr> <netmask> <1-4093>
Mode
VLAN Config
no vlan association subnet
This command removes association of a specific IP-subnet to a VLAN.
Format
no vlan association subnet <ipaddr> <netmask>
Mode
VLAN Config
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-40
Advertisement
Chapters
Table of Contents
