Script Apply; Script Delete; Script List - NETGEAR ProSafe GSM7228PS Cli Manual

Note: To specify a blank password for a user in the configuration script, you must specify
it as a space within quotes. For example, to change the password for user jane
from a blank password to hello, the script entry is as follows:
users passwd jane
" "
hello
hello

script apply

This command applies the commands in the script to the switch. The <scriptname> parameter
is the name of the script to apply.
Format
script apply <scriptname>
Mode Privileged EXEC

script delete

This command deletes a specified script where the <scriptname> parameter is the name of the
script to delete. The <all> option deletes all the scripts present on the switch.
Format
script delete {<scriptname> | all}
Mode Privileged EXEC

script list

This command lists all scripts present on the switch as well as the remaining available space.
Format
script list
Mode Global Config
Term
Configuration Script
Size
Management Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Definition
Name of the script.
Privileged EXEC
v1.0, May 2010
8-72