Ip Domain Timeout; Clear Host - NETGEAR ProSafe GSM7228PS Cli Manual

no ip domain retry
Use this command to return to the default.
Format
no ip domain retry <number>
Mode Global Config

ip domain timeout

Use this command to specify the amount of time to wait for a response to a DNS query. The
parameter <seconds> specifies the time, in seconds, to wait for a response to a DNS query.
<seconds> ranges from 0 to 3600.
Default 3
Format
ip domain timeout <seconds>
Mode Global Config
no ip domain timeout
Use this command to return to the default setting.
Format
no ip domain timeout <seconds>
Mode Global Config

clear host

Use this command to delete entries from the host name-to-address cache. This command clears the
entries from the DNS cache maintained by the software. This command clears both IPv4 and IPv6
entries.
Format
clear host {<name> | all}
Mode Privileged EXEC
Field Description
name A particular host entry to remove. <name> ranges from 1-255 characters.
all Removes all entries.
Utility Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
7-58