NETGEAR ProSafe GSM7228PS Cli Manual page 527

Default 0
Format
max-bandwidth-up <0-536870911>
Mode Captive Portal Instance mode
no max-bandwidth-up
Use this command to reset the maximum rate to the default
Format
no max-bandwidth-up
Mode Captive Portal Instance mode
max-input-octets
Use this command to configure the maximum number of octets the user is allowed to transmit.
After this limit has been reached the user will be disconnected. The number of octets is in bytes. 0
indicates limit not enforced.
Default 0
Format
max-input-octets
Mode Captive Portal Instance mode
no max-input-octets
Use this command to reset the limit to the default.
Format
no max-input-octets
Mode Captive Portal Instance mode
Captive Portal Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
<0-4294967295>
v1.0, May 2010
.
10-10