Lldp-Med Commands - NETGEAR ProSafe GSM7228PS Cli Manual

Term Definition
System Shows which of the supported system capabilities are enabled.
Capabilities
Enabled
Management The type of address and the specific address the local LLDP agent uses to send and
Address
receive information.

LLDP-MED Commands

Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057)
provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for
network configuration and policy, device location, Power over Ethernet (PoE) management and
inventory management.
lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the
transmit and receive function of LLDP.
Default enabled
Format
lldp med
Mode Interface Config
no lldp med
Use this command to disable MED.
Format
no lldp med
Mode Interface Config
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-168