Show Lldp Med Local-Device Detail - NETGEAR ProSafe GSM7228PS Cli Manual

TLV Codes: 0- Capabilities,
2- Location,
4- Extended Pd,
--More-- or (q)uit
(Switch) #show lldp med interface 1/0/2
Interface Link
--------- ------
1/0/2 Up
TLV Codes: 0- Capabilities,
2- Location,
4- Extended Pd,
(Routing) #

show lldp med local-device detail

This command displays detailed information about the LLDP data a specific interface transmits.
Format
show lldp med local-device detail <unit/slot/port>
Mode Privileged EXEC
Term Definition
Media Application Shows the application type. Types are unknown, voice, voicesignaling, guestvoice,
Type
guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
videosignaling.
Vlan ID Shows the VLAN id associated with a particular policy type
Priority Shows the priority associated with a particular policy type.
DSCP Shows the DSCP associated with a particular policy type.
Unknown Indicates if the policy type is unknown. In this case, the VLAN ID, Priority and DSCP
are ignored.
Tagged Indicates if the policy type is using tagged or untagged VLAN.
Hardware Rev Shows the local hardware version.
Firmware Rev Shows the local firmware version.
Software Rev Shows the local software version.
Serial Num Shows the local serial number.
Mfg Name Shows the manufacture name.
Model Name Shows the model name.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
1- Network Policy
3- Extended PSE
5- Inventory
configMED operMED
--------- --------
Disabled Disabled
1- Network Policy
3- Extended PSE
5- Inventory
v1.0, May 2010
ConfigNotify TLVsTx
------------ -----------
Disabled 0,1
3-174