Voice Vlan Data Priority; Show Voice Vlan - NETGEAR ProSafe GSM7228PS Cli Manual

Parameter Description
none Allow the IP phone to use its own configuration to send untagged voice traffic.
untagged Configure the phone to send untagged voice traffic.
no voice vlan (Interface Config)
Use this command to disable the Voice VLAN capability on the interface.
Format
no voice vlan
Mode Interface Config

voice vlan data priority

Use this command to either trust or untrust the data traffic arriving on the Voice VLAN port.
Default trust
Format
voice vlan data priority {untrust | trust}
Mode Interface Config

show voice vlan

Format
show voice vlan [interface {<unit/slot/port> | all}]
Mode Privileged EXEC
When the interface parameter is not specified, only the global mode of the Voice VLAN is
displayed.
Term Definition
Administrative The Global Voice VLAN mode.
Mode
When the interface is specified:
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-49