Upgrading Zenworks Orchestrator 1.3 Components To Platespin Orchestrate; Upgrading The Zenworks Orchestrator Server Components - Novell PLATESPIN ORCHESTRATE 2.0.2 - UPGARDE GUIDE 10-09-2009 Upgrade Manual

Upgrading ZENworks
2
Orchestrator 1.3 Components to
PlateSpin Orchestrate 2.0
This section provides information about upgrading from Novell
®
PlateSpin Orchestrate 2.0 from Novell. It is important that you upgrade the ZENworks
Orchestrator components you have installed in the sequence that follows:
Section 2.1, "Upgrading the ZENworks Orchestrator Server Components," on page 15
Section 2.2, "Orchestrator Components That Are Not Upgraded," on page 32
Section 2.3, "Recovering from a Failed Orchestrator Server Upgrade," on page 33
Section 2.4, "Restoring ZENworks Orchestrator If the Upgrade Fails," on page 33
Section 2.5, "Upgrading the ZENworks Orchestrator Agents and Clients," on page 37
Section 2.6, "Upgrading the ZENworks VM Manager Console to PlateSpin Orchestrate VM
Client," on page 48
Section 2.7, "Running the Upgrade Configuration on an Enterprise Scale," on page 48
Section 2.8, "Upgrading a ZENworks Orchestrator 1.3 High Availability Configuration," on
page 48
NOTE: The upgrade process from 2.0.1 to 2.0.2 is identical to the upgrade from 1.3 to 2.0.2.
2.1 Upgrading the ZENworks Orchestrator
Server Components
The following information lists the upgrade steps in the order that they should be performed.
1. Section 2.1.1, "Checking Out the VMs that Are to be Used in PlateSpin Orchestrate," on
page 16
2. Section 2.1.2, "Backing Up the Orchestrator Server Prior to Upgrading," on page 16
3. Section 2.1.3, "Checking the Current Version of ZENworks Orchestrator," on page 16
4. Section 2.1.4, "Snapshotting the Existing Server Installation," on page 17
5. Section 2.1.5, "Upgrading the ZENworks Orchestrator Server Packages," on page 18
If you use the command line tools to upgrade, we recommend that you also clean up any
obsolete packages after the upgrade. Follow the steps in
ZENworks Orchestrator Patterns" on page
6. Section 2.1.6, "Removing Obsolete and Unneeded ZENworks Orchestrator Patterns," on
page 22.
7. Section 2.1.7, "Revising An Outdated, Required .conf File," on page 22
8. Section 2.1.8, "Running Discover on VM Images," on page 23

Upgrading ZENworks Orchestrator 1.3 Components to PlateSpin Orchestrate 2.0

®
ZENworks
"Removing Obsolete and Unneeded
22.
®
Orchestrator 1.3 to
2
15