Language; Media Check - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual

Interactive
Use ask to open a pop-up menu during the installation where you can specify
the path to the certificate. Do not use this option with AutoYaST. Example
smtcert=ask
Deactivate certificate installation
Use done if either the certificate will be installed by an add-on product, or if
you are using a certificate issued by an official certificate authority. Example:
smtcert=done
WARNING: Beware of typing errors
Make sure the values you enter are correct. If smturl has not been specified
correctly, the registration of the update source will fail. If a wrong value for
smtcert has been entered, you will be prompted for a local path to the certifi-
cate.
In case smtcert is not specified, it will default to http://FQN/smt.crt with
FQN being the name of the SMT server.

3.4 Language

YaST and SUSE Linux Enterprise in general can be configured to use different languages
according to your needs. The language selected here is also used for the keyboard layout.
In addition, YaST uses the language setting to guess a time zone for the system clock.
These settings can be modified later along with the selection of secondary languages
to install on your system.
You can change the language later during installation as described in
stallation Settings" (page 25). For information about language settings in the installed
system, see Section 8.1, "YaST Language"

3.5 Media Check

The media check dialog appears only if you install from media created from downloaded
ISOs. If you install from the original media set, the dialog is skipped.
(page 120).
Section 3.9, "In-
Installation with YaST 23