Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 211

Installing a SUSE Linux Enterprise Service Pack is very similar to installing the original
SUSE Linux Enterprise media. As with the original installation, you can choose to install
from a local CD or DVD drive or from a central network installation source.
Installing from a Local CD or DVD Drive
Before starting a new installation of a SUSE Linux Enterprise SP, ensure that all of the
Service Pack installation media (CDs or DVD) are available.
Procedure 9.1 Booting from the Service Pack Medium
1 Insert the first SUSE Linux Enterprise SP medium (CD 1 or DVD 1) and boot
your machine. A boot screen similar to the original installation of SUSE Linux
Enterprise 10 is displayed.
2 Select Installation and continue as outlined in the YaST installation instructions
in Chapter 3, Installation with YaST
Network Installation
Before starting a network installation of an SUSE Linux Enterprise SP, make sure that
the following requirements are met:
• A network installation source set up according to
Network Installation Source for Service Pack Media"
• A working network connection both on the installation server and the target machine
that includes a name service, DHCP (optional, but needed for PXE boot), and
OpenSLP (optional).
• The SUSE Linux Enterprise SP CD 1 or DVD 1 to boot the target system or a target
system set up for PXE boot according to
for PXE Boot" (page 67).
Network Installation—Boot from CD or DVD
To perform a network installation using the SP CD or DVD as the boot medium, proceed
as follows:
(page 17).
Section 9.2.1, "Setting Up a
(page 194).
Section 4.3.5, "Preparing the Target System
Updating SUSE Linux Enterprise 195