Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 100

default linux
# default label linux
kernel linux append initrd=initrd ramdisk_size=65536 insmod=e100 \
install=http://192.168.0.22/install/suse-enterprise/
The same example for autoinstallation looks like this:
default linux
# default label linux
kernel linux append initrd=initrd ramdisk_size=65536 insmod=e100 \
install=http://192.168.0.22/install/suse-enterprise/ \
autoyast=nfs://192.168.0.23/profiles/autoinst.xml
Replace the example IP addresses and paths with the data used in your setup.
Preparing to Boot from CD-ROM
There are several ways in which booting from CD-ROM can come into play in Auto-
YaST installations. Choose from the following scenarios:
Boot from SUSE Linux Enterprise Media, Get the Profile over the Network
Use this approach if a totally network-based scenario is not possible (for example,
if your hardware does not support PXE) and you have physical access to system
to install during most of the process.
You need:
• The SUSE Linux Enterprise media
• A network server providing the profile data (see
• A floppy containing the info file that tells the installation routines where to find
84 Deployment Guide
Profile and Determining the autoyast Parameter"
the profile
or
Section 5.1.2, "Distributing the
(page 80) for details)