Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 413

Option
restart
reload
force-reload
status
Links in each runlevel-specific subdirectory make it possible to associate scripts with
different runlevels. When installing or uninstalling packages, these links are added and
removed with the help of the program insserv (or using /usr/lib/lsb/install
_initd, which is a script calling this program). See the insserv(8) man page for details.
All of these settings may also be changed with the help of the YaST module. If you
need to check the status on the command line, use the tool chkconfig, described in the
chkconfig(8) man page.
A short introduction to the boot and stop scripts launched first or last, respectively,
follows as well as an explanation of the maintaining script.
boot
Executed while starting the system directly using init. It is independent of the
chosen runlevel and is only executed once. Here, the /proc and /dev/pts file
systems are mounted and blogd (boot logging daemon) is activated. If the system
is booted for the first time after an update or an installation, the initial system con-
figuration is started.
The blogd daemon is a service started by boot and rc before any other one. It is
stopped after the actions triggered by these scripts (running a number of subscripts,
for example, making block special files available) are completed. blogd writes any
screen output to the log file /var/log/boot.msg, but only if and when /var
is mounted read-write. Otherwise, blogd buffers all screen data until /var becomes
available. Get further information about blogd on the blogd(8) man page.
Description
If the service is running, stop it then restart it. If it is not
running, start it.
Reload the configuration without stopping and restarting
the service.
Reload the configuration if the service supports this.
Otherwise, do the same as if restart had been given.
Show the current status of service.
Booting and Configuring a Linux System 397