Wake On Lan - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual

Displays the indicated file on the screen when a function key is pressed at the boot
prompt. This can be used to implement preboot online help (presumably for the
kernel command line options). For backward compatibility with earlier releases,
F10 can be also entered as F0 . Note that there is currently no way to bind filenames
to F11 and F12 .
4.3.5 Preparing the Target System for PXE
Boot
Prepare the system's BIOS for PXE boot by including the PXE option in the BIOS boot
order.
WARNING: BIOS Boot Order
Do not place the PXE option ahead of the hard disk boot option in the BIOS.
Otherwise this system would try to reinstall itself every time you boot it.
4.3.6 Preparing the Target System for Wake
on LAN
Wake on LAN (WOL) requires the appropriate BIOS option to be enabled prior to the
installation. Also, note down the MAC address of the target system. This data is needed
to initiate Wake on LAN.

4.3.7 Wake on LAN

Wake on LAN allows a machine to be turned on by a special network packet containing
the machine's MAC address. Because every machine in the world has a unique MAC
identifier, you do not need to worry about accidentally turning on the wrong machine.
IMPORTANT: Wake on LAN across Different Network Segments
If the controlling machine is not located in the same network segment as the
installation target that should be awakened, either configure the WOL requests
Remote Installation 67