Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 26

Choose from the following options:
Simple Remote Installation via VNC—Static Network Configuration
Consider this approach in a small to medium scenario with a static network setup.
A network, network installation server, and VNC viewer application are required.
Simple Remote Installation via VNC—Dynamic Network Configuration
Consider this approach in a small to medium scenario with dynamic network setup
through DHCP. A network, network installation server, and VNC viewer application
are required.
Remote Installation via VNC—PXE Boot and Wake on LAN
Consider this approach in a small to medium scenario that should be installed via
network and without physical interaction with the installation targets. A network,
a network installation server, network boot images, network bootable target hard-
ware, and a VNC viewer application are required.
Simple Remote Installation via SSH—Static Network Configuration
Consider this approach in a small to medium scenario with static network setup.
A network, network installation server, and SSH client application are required.
Remote Installation via SSH—Dynamic Network Configuration
Consider this approach in a small to medium scenario with dynamic network setup
through DHCP. A network, network installation server, and SSH client application
are required.
Remote Installation via SSH—PXE Boot and Wake on LAN
Consider this approach in a small to medium scenario that should be installed via
network and without physical interaction with the installation targets. A network,
a network installation server, network boot images, network bootable target hard-
ware, and an SSH client application are required.
Simple Mass Installation
Consider this approach for large deployments to identical machines. If configured
to use network booting, physical interaction with the target systems is not needed
at all. A network, a network installation server, a remote controlling application
such as a VNC viewer or an SSH client, and an AutoYaST configuration profile
are required. If using network boot, a network boot image and network bootable
hardware are required as well.
10 Deployment Guide
(page 14)
(page 11)
(page 11)
(page 12)
(page 12)
(page 13)
(page 14)