Configuring Ldap Users And Groups In Yast - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual

35.4 Configuring LDAP Users and
Groups in YaST
The actual registration of user and group data differs only slightly from the procedure
when not using LDAP. The following brief instructions relate to the administration of
users. The procedure for administering groups is analogous.
1 Access the YaST user administration with Security & Users > User Administra-
tion.
2 Use Set Filter to limit the view of users to the LDAP users and enter the password
for Root DN.
3 Click Add and enter the configuration of a new user. A dialog with four tabs
opens:
3a Specify username, login, and password in the User Data tab.
3b Check the Details tab for the group membership, login shell, and home di-
rectory of the new user. If necessary, change the default to values that better
suit your needs. The default values as well as those of the password settings
can be defined with the procedure described in
YaST Group and User Administration Modules"
3c Modify or accept the default Password Settings.
3d Enter the Plug-Ins tab, select the LDAP plug-in, and click Launch to config-
ure additional LDAP attributes assigned to the new user (see
"YaST: Additional LDAP Settings"
4 Click Accept to apply your settings and leave the user configuration.
Section "Configuring the
(page 682).
(page 686)).
LDAP—A Directory Service
Figure 35.6,
685