Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 724

and IP networks. For a more thorough explanation of these options, refer to
exports man page. Click Finish to complete the configuration.
Figure 37.3 Configuring an NFS Server with YaST
IMPORTANT: Automatic Firewall Configuration
If a firewall is active on your system (SuSEfirewall2), YaST adapts its configuration
for the NFS server by enabling the nfs service when Open Ports in Firewall is
selected.
37.4.1 Exporting for NFSv4 Clients
Activate Enable NFSv4 to support NFSv4 clients. Clients with NFSv3 can still access
the server's exported directories if they are exported appropriately. This is explained in
detail in
After activating NFSv4, enter an appropriate domain name. Make sure that the name
entered is the same as the one present in the /etc/idmapd.conf file of any NFSv4
client that accesses this particular server. This parameter is for the idmapd service that
is required for NFSv4 support (on both server and client). Leave it as localdomain
708 Deployment Guide
Section 37.4.3, "Coexisting v3 and v4 Exports" (page 711).