Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 826

notsc
Disable the time stamp counter. This option can be used to work around timing
problems on your systems. It is a new feature, if you see regressions on your ma-
chine, especially time related or even total hangs, this option is worth a try.
nohz=off
Disable the nohz feature. If your machine hangs, this option might help. Generally,
you do not need it.
Once you have determined the right parameter combination, YaST automatically writes
them to the boot loader configuration to make sure that the system boots properly next
time.
If unexplainable errors occur when the kernel is loaded or during the installation, select
Memory Test in the boot menu to check the memory. If Memory Test returns an error,
it is usually a hardware error.
46.2.6 Fails to Launch Graphical Installer
After you insert the first CD or DVD into your drive and reboot your machine, the in-
stallation screen comes up, but after you select Installation, the graphical installer does
not start.
There are several ways to deal with this situation:
• Try to select another screen resolution for the installation dialogs.
• Select Text Mode for installation.
• Do a remote installation via VNC using the graphical installer.
To change to another screen resolution for installation, proceed as follows:
1 Boot for installation.
2 Press F3 twice to open a menu from which to select a lower resolution for instal-
3 Select Installation and proceed with the installation as described in
810 Deployment Guide
lation purposes.
Installation with YaST
(page 17).
Chapter 3,