Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 635

If you selected Wireless as the device type of the interface, configure the wireless
connection in the next dialog. Detailed information about wireless device confi-
guration is available in
5 In the General tab, set the Firewall Zone and Device Activation. With User
Controlled, grant connection control to ordinary users.
6 Click Next.
7 To activate the new network configuration, click Finish.
Information about the conventions for configuration names is available in the
getcfg(8) man page.
30.4.2 Modem
In the YaST Control Center, access the modem configuration with Network Devices >
Modem. If your modem was not automatically detected, open the dialog for manual
configuration by clicking Add. In the dialog that opens, enter the interface to which the
modem is connected for Modem Device.
TIP: CDMA and GPRS Modems
Configure supported CDMA and GPRS modems with the YaST modem module
just as you would configure regular modems.
Section 29.1, "Wireless LAN" (page 563).
Basic Networking 619