Managing Profiles Manually - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual

Figure 11.6 The Profile in Use
Return to your own desktop by logging out as tester. If you need to make
changes, start the setup procedure again. Otherwise leave the KIOSK Admin
Tool. On exit, it deploys all profiles to testserver. You must enter the root
password on testserver for this operation. Because the profiles are deployed
to the default KDE profile location in this example, no further action is required.
The next time tester logs in on testserver, the myCompany profile is
used.

11.2 Managing Profiles Manually

If you prefer manually editing configuration files over using a graphical tool, the KIOSK
framework lets you do this, too. Every configuration file in a profile is a plain text file
that can be edited with the editor of your choice. KIOSK's configuration and deployment
options are described in detail in The KDE Source Repository at
.kde.org/trunk/KDE/kdelibs/kdecore/README.kiosk?view=markup.
Refer to this resource for details. In the following, only the fundamentals needed to use
the KIOSK framework are described.
http://websvn
KDE Configuration for Administrators 297