Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 846

Automatic Repair
If your system failed due to an unknown cause and you basically do not know
which part of the system is to blame for the failure, use Automatic Repair. An ex-
tensive automated check will be performed on all components of your installed
system. For a detailed description of this procedure, refer to
Repair"
Customized Repair
If your system failed and you already know which component is to blame, you can
cut the lengthy system check with Automatic Repair short by limiting the scope of
the system analysis to those components. For example, if the system messages
prior to the failure seem to indicate an error with the package database, you can
limit the analysis and repair procedure to checking and restoring this aspect of your
system. For a detailed description of this procedure, refer to
Repair"
Expert Tools
If you already have a clear idea of what component failed and how this should be
fixed, you can skip the analysis runs and directly apply the tools necessary for the
repair of the respective component. For details, refer to
(page 833).
Choose one of the repair modes as described above and proceed with the system repair
as outlined in the following sections.
Automatic Repair
To start the automatic repair mode of YaST System Repair, proceed as follows:
1 Insert the first installation medium of SUSE Linux Enterprise into your CD or
2 Reboot the system.
3 At the boot screen, select Installation.
4 Select the language and click Next.
5 Confirm the license agreement and click Next.
830 Deployment Guide
(page 830).
(page 832).
DVD drive.
Section "Automatic
Section "Customized
Section "Expert Tools"