Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 69

1 Log in as root.
2 Enter the directory /etc/slp.reg.d/.
3 Create a configuration file called install.suse.nfs.reg containing the
following lines:
# Register the NFS Installation Server
service:install.suse:nfs://$HOSTNAME/path_to_instsource/CD1,en,65535
description=NFS Installation Source
Replace path_to_instsource with the actual path to the installation source
on your server.
4 Save this configuration file and start the OpenSLP daemon with rcslpd start.
For more information about OpenSLP, refer to the package documentation located under
/usr/share/doc/packages/openslp/ or refer to
in the Network (page 649).
4.2.3 Setting Up an FTP Installation Source
Manually
Creating an FTP installation source is very similar to creating an NFS installation source.
FTP installation sources can be announced over the network using OpenSLP as well.
1 Create a directory holding the installation sources as described in
"Setting Up an NFS Installation Source Manually"
2 Configure the FTP server to distribute the contents of your installation directory:
2a Log in as root and install the package vsftpd using the YaST package
manager.
2b Enter the FTP server root directory:
cd /srv/ftp
Chapter 31, SLP Services
Section 4.2.2,
(page 50).
Remote Installation 53