Table of Contents
Advertisement
The actual installation of SUSE Linux Enterprise begins at this point. All YaST screens
have a common layout. All buttons, entry fields, and lists can be accessed with the
mouse or the keyboard. If your mouse pointer does not move, the mouse has not been
detected automatically. In this case, use the keyboard for the time being. Navigation
with the keyboard is similar to the description in
Section 7.11.1, "Navigation in Modules"
(page 185).
3.4 Language Selection
YaST and SUSE Linux Enterprise in general can be configured to use different languages
according to your needs. The language selected here is also used for the keyboard layout.
In addition, YaST uses the language setting to guess a time zone for the system clock.
These settings can be modified later along with the selection of secondary languages
to install on your system. If your mouse does not work, select the language with the
arrow keys and press
until Next is highlighted. Then press
to confirm your
Tab
Enter
language selection.
3.5 IBM System z: Hard Disk
Configuration
When installing on IBM System z platforms, the language selection dialog is followed
by a dialog to configure the attached hard disks. Select DASD, Fibre Channel Attached
SCSI Disks (ZFCP), or iSCSI for installation of SUSE Linux Enterprise Server.
After selecting Configure DASD Disks, you are presented with an overview listing all
available DASDs. To get a clearer picture of the available devices, use the entry field
located above the list to specify a range of channels to display. To filter the list according
to such a range, select Filter. See
Figure 3.1, "IBM System z: Selecting a DASD"
(page 41).
40
Installation and Administration
Advertisement
Table of Contents
Troubleshooting
