Novell LINUX ENTERPRISE DESKTOP 10 SP2 - DEPLOYMENT GUIDE 08-05-2008 Deployment Manual page 607

Note that the current user needs to be in the dialout group to be able to connect
to a network. After restarting UMTSmon, the user should now be able to establish
a network connection.
Does /etc/sysconfig/network contain a file named ifcfg-raw0?
This file is needed to establish a connection with smpppd. If it is not present in
/etc/sysconfig/network, create an empty file with
touch ifcfg-raw0
You still cannot establish a network connection with UMTSmon?
Run the following commands as root:
touch /etc/sysconfig/network/ifcfg-raw0
rcsmpppd restart
Try to reconnect to a network with UMTSmon. After the connection has been es-
tablished, check the Kernel IP Routing Table you get with /sbin/route -n.
It should contain an entry such as the following with ppp0 listed as Iface for
Destination 0.0.0.0:
Destination Gateway
0.0.0.0 10.64.64.64
29.4.4 For More Information
Find further additional (last-minute) documentation about UMTSmon in your installed
system under /usr/share/doc/packages/umtsmon/README.SUSE
Genmask Flags Metric Ref
0.0.0.0 UG
Use Iface
0 0 0 ppp0
Wireless Communication 591