Correcting Errors In A Jsl - Xerox DocuPrint 100 Software Manual

Using LCDS Print Description Language

Correcting errors in a JSL

If errors are encountered in a JSL while it is being compiled, the
following message appears in the Terminal window:
**********JSL CONTAINS ERROR(S)**********
Figure 1-20. Terminal window displaying compiling
messages for a JSL with errors
The system does not create a .JDL file in the "lcds" folder, but it
does create a .LST file, which shows where the errors are.
1. Open and inspect the .LST file to locate the errors that
prevented the JSL from compiling.
To open a .LST file:
a. Open a UNIX Text Editor window. (Refer to "Full JSL
coding procedure," earlier in this chapter, for instructions.)
b. From the File menu on the Text Editor window, select
[Open] to display the Text Editor – Open a File window.
PDL principles and procedures
1-69