Xerox DocuPrint 100 Software Manual page 99

Using LCDS Print Description Language
Figure 1-22. A .LST file for a JSL containing errors
2. Open another Text Editor window and display your JSL in this
new window. (The procedure for displaying the JSL is
described under "Opening a file in the Text Editor," above.)
3. Enter the indicated corrections to your JSL, referring to the
.LST file in the other Text Editor window as needed.
4. On the Terminal window, recompile the corrected JSL, using
the compiling procedure that is described earlier in this
section.
PDL principles and procedures
1-71