Xerox DocuPrint 100 Software Manual page 283

Table 4-42. Summary of OUTPUT command parameters (Continued)
Parameter
OUTPUT GRAPHICS
OUTPUT IDFAULT
OUTPUT IDR
OUTPUT IMAGE
OUTPUT INVERT
OUTPUT IRESULT
OUTPUT LOGO
OUTPUT MODIFY
OUTPUT NTO1
OUTPUT NUMBER
OUTPUT OFFSET
OUTPUT OSTK
OUTPUT PAPERSIZE
OUTPUT PURGE
OUTPUT SF1FUNCTION
OUTPUT SF2FUNCTION
OUTPUT SHIFT
OUTPUT SIZING
Using LCDS Print Description Language
Specifies
Specifies if and how graphics are used in the
job.
Specifies the default ink that will be used for
parameters in which no ink is specified.
Specifies the name of an ink descriptor (IDR)
that will be used for the job.
Specifies initial scaling and positioning for
Batch mode graphics.
Rotates an image 180 degrees on the printed
page.
Specifies whether the result of overlapping
pixels will be a colored or a black pixel.
Enables selection and positioning of a logo.
Associates copy modification entries with
report copies.
Specifies on a report basis whether the pages
of all copies of a report are printed in
ascending (1 to N) or descending (N to 1)
order.
Specifies whether page numbers will be
printed and, if so, defines their location and
appearance.
Specifies whether reports are offset in the
stacker.
Specifies the job will be printed on ordered
stock.
Specifies the size paper to be used for the job.
Specifies the default disposition of document
interleaved graphics after printing.
Specifies a function for sheet finisher function
number 1.
Specifies a function for sheet finisher function
number 2.
Shifts image on the y axis (vertically) on the
page.
Controls matching the paper that is specified
when the page is formatted with the paper
sizes in the trays.
Specifying print format parameters
Online
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Offline DJDE
Y N
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y N
Y N
Y N
Y N
Y Y
Y Y
Y Y
Y Y
4-43