Volume Optimize - Xerox DocuPrint 100 Software Manual

Specifying input parameters
Options
Table 2-71. VOLUME MINLAB parameter options and definitions
Option
value
Default
Syntax
Options
Table 2-72. VOLUME OPTIMIZE parameter options and definitions
Option
NCCHECK
NONE
VOLUME
OPTIMIZE
parameter: Point
to note
2-66
Definition
Specifies in bytes the maximum length of the smallest physical block. The value
can range from 1 to 4095 bytes. The specified value must be less than the
MAXLAB value and must not exceed the BLOCK LENGTH.
80

VOLUME OPTIMIZE

Enhances the performance of the data stream.
NOTE: This parameter is supported only partially by the DP
EPS. The parameter options table below reflects only the options
that are supported.
VOLUME OPTIMIZE = {NCCHECK | NONE}
Definition
NCCHECK
Disables channel 9 and channel 12 detection. When this option is selected. the
host is not notified by the printing system each time channel 9 or 12 is
recognized. Any skips to channel 9 or 12 are allowed as for any other channel.
NOTE: This option is supported on the DP EPS only for Fuji Xerox markets. All
other DP systems process it as NONE.
No optimization actions are taken.
The NCCHECK option is supported for DP EPS only for Fuji
Xerox markets. It is processed in other markets as if NONE were
specified.
Using LCDS Print Description Language