Iden Offset; Iden Oprinfo - Xerox DocuPrint 100 Software Manual

Specifying input parameters
Syntax
Options
Table 2-24. IDEN OFFSET parameter option and definition
Option
value
Default
Syntax
Options
Default

IDEN OPRINFO

parameter: point
to note
2-26

IDEN OFFSET

Specifies the number of bytes (beginning at 0) from the
beginning of the user portion of the record to the beginning of the
prefix string constant of the DJDE record. The number may be
negative.
IDEN OFFSET = value
Definition
Specifies the number of bytes (beginning at 0) from the beginning of the user
portion of the record to the beginning of the prefix string constant of the DJDE
record. It may be a negative number.
0
IDEN OPRINFO
Specifies whether or not the DJDE record is printed and
delivered to the stacker.
IDEN OPRINFO = {YES | NO}
Table 2-25. IDEN OPRINFO options and definitions
Option Definition
YES Specifies that the DJDE record prints and is delivered to the stacker.
NO Specifies that the DJDE record does not print.
NO
When OPRINFO=YES is selected, the length of the DJDE record
that prints on the sheet is whatever amount fits on the width of
the paper.
Using LCDS Print Description Language