Seffnt Command Examples - Xerox DocuPrint 100 Software Manual

Specifying input parameters
Example 1
Example 2
Example 3
Example 4
2-48
• If you want to use 11 by 17 inch paper or any size that
requires SEF, be aware that form source libraries (.FSL) files,
form (.FRM) files, logo (.LGO) files, and image (.IMG) files
are not automatically scaled or rotated. You may need to alter
the FSL text file to specify that the form should be rotated.

SEFFNT command examples

Following are a few examples of how to use the SEFFNT
command.
A FNTMAP.LIB file is created on the system disk.
FNTMAP: SEFFNT
SYS1: SYSTEM;
VOLUME
Job 1 uses the SEFFNT command because there is no override
specified.
SEFFNT
PDE1: PDE
JOB1: JOB;
OUTPUT
Job 2 uses the FNTMAP.LIB file created in example 1.
JOB2: JOB;
OUTPUT
SEFFNT
There is no font mapping because SEF is disabled by the
SEFMAP=NONE parameter.
JOB3: JOB;
OUTPUT
SEFFNT
SEFMAP=(L0112B,P0612A);
CODE=ASCII;
SEFMAP=(L0114B, P0614A);
FONT=L0114B,
PMODE=LANDSCAPE,
BEGIN=(.50,.50);
FORMAT=PDE1;
FORMAT=FMT1;
MAP=FNTMAP;
FORMAT=FMT6;
SEFMAP=NONE;
Using LCDS Print Description Language