Abnormal Command; Abnormal Command Parameters; Abnormal Acctfeed - Xerox DocuPrint 100 Software Manual

Specifying print format parameters

ABNORMAL command

Table 4-2. Summary of ABNORMAL command parameters
Parameter

ABNORMAL ACCTFEED

ABNORMAL CODE
ABNORMAL ERROR
ABNORMAL IMISMATCH
ABNORMAL ISUBSTITUTE
ABNORMAL OTEXT
ABNORMAL REP
ABNORMAL SECURITY
Syntax
4-2
The ABNORMAL command allows you to restrict certain
operator functions and to define system responses to error
conditions.

ABNORMAL command parameters

The following table summarizes the ABNORMAL command
parameters.
Specifies
Specifies the stock from which an error sheet
will be fed when an error occurs during the
accounting report processing.
Specifies how illegal function codes in the
data stream will be handled.
Specifies the system response to abnormal
conditions detected while processing DJDEs.
Specifies action to take when the job contains
a specification for an ink that is not loaded in
the printer.
Specifies whether or not an ink substitution
can be made by the operator.
Specifies that a message will be displayed to
the operator when printing stops because of a
system rollover.
Generates a page offset and/or slip sheet
after recovery from a rollover.
Enables restriction on use of certain operator
commands.
The following sections describe the syntax of the ABNORMAL
command parameters and explain the parameter options.
ABNORMAL ACCTFEED
Specifies the stock from which an error sheet will feed when an
error occurs during accounting report processing.
ABNORMAL ACCTFEED = {AUX | OPR}
Online
N
N
Y
Y
Y
Y
Y
Y
Using LCDS Print Description Language
Offline DJDE
Y N
Y N
Y N
Y N
Y N
Y N
Y N
Y N