Printing Highlight Color Applications On Dp Eps - Xerox DocuPrint 100 Software Manual

PDL principles and procedures

Printing highlight color applications on DP EPS

1-78
If you have a Xerox 4850, 4890, or DP92C HighLight Color Laser
Printing System, your applications probably include the use of
highlight color (one color plus black). The JDLs used to print
these applications contain commands and parameters that
specify the location and the color ink to be used. These color
JDLs may also contain commands indicating what the system
should do if a JDL specifies a different color ink from what is
loaded in the printer.
The DP EPS can print jobs that were designed for the 4850,
4890, or DP92C LPS and contain color commands. When you
run a highlight color job on the DP EPS, the job prints in black
ink. (Some solid colored or shaded areas may print in various
shades of gray.)
The following table lists the highlight color related PDL
commands, parameters, and DJDEs.
Table 1-15. Highlight color commands
Command Color parameter
ABNORMAL IMISMATCH
ISUBSTITUTE
CME INKS
IDR ICATALOG
ILIST
PALETTES
LINE INKINDEX
LMODIFY INK
SELECT
TEST
OUTPUT FORMS
GRAPHICS
IDFAULT
IDR
IRESULT
DJDE
available?
No
No
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Using LCDS Print Description Language