Dbcode Command Parameters; Dbcode Assign - Xerox DocuPrint 100 Software Manual

ac identifier
Table 2-19. Summary of DBCODE command parameters
Parameter

DBCODE ASSIGN

DBCODE DEFAULT
Syntax
Options
Table 2-20. DBCODE ASSIGN parameter options and definitions
Option
input
output
Default
Using LCDS Print Description Language
A command identifier of the type ac is optional for the first
DBCODE command within a JDE. Thereafter, each additional
DBCODE command must include the identifier. The ac identifier
consists of 1 to 6 alphanumeric characters (A through Z and 0
through 9). One of the characters must be alphabetic.

DBCODE command parameters

The following table summarizes the DBCODE command
parameters.
Specifies
Defines user double-byte code assignments.
Specifies a base code from which double-byte
character code assignment exceptions can be
made.
The following sections describe the syntax of the DBCODE
command parameters and explain the parameter options.
DBCODE ASSIGN
Defines double-byte character code assignment exceptions or
an entire user character translation table.
ac: DBCODE ASSIGN = {(input, output) | (input, (output
output ] [,...])}
2
Definition
A numeric constant that defines the input double-byte code.
A numeric constant that defines the output double-byte code that corresponds
to the input code
No default
Specifying input parameters
Online Offline
Y N
Y N
1
DJDE
N
N
[,
2-23