Pcc Advtape; Pcc Assign - Xerox DocuPrint 100 Software Manual

Table 2-31. Summary of PCC command parameters (Continued)
Parameter
OFFSET
POSTAMBLE
STRUCTURE
Syntax
Options
Option
YES
NO
Default

PCC ADVTAPE

parameter: point
to note
Syntax
Using LCDS Print Description Language
Specifies
Location of record length field
Length of extraneous data at end of record
Input record structure
The following sections describe the syntax of the command
parameters and explain their options.
PCC ADVTAPE
Specifies whether or not the carriage control advances to a new
page when two successive channel skip parameters are issued
with no intervening print.
For example, on most printers, the actions PSK1 (Print and Skip
to Channel 1) followed by SK1N (Skip to Channel 1, Do Not
Print) cause a blank page to be output. However, on a 1403
printer, these actions do not produce a blank page.
[ac:] PCC ADVTAPE = {YES | NO}
Table 2-32. PCC ADVTAPE parameter options and definitions
Definition
Specifies that multiple skips are honored.
Specifies that multiple skips result in only one skip action being taken.
No default
SK1P (skip to channel 1 and print) followed by a second SK1P
results in a page transition because printing occurred on the first
page, even if only blanks were output.

PCC ASSIGN

Specifies printer carriage control exceptions to a default table
(refer to the PCC DEFAULT parameter description).
[ac:] PCC ASSIGN = {(byte, ccln) | (byte, (ccln
Specifying input parameters
Online Offline
Y N
Y N
Y N
[, ccln ] [, ...])}
1 2
DJDE
N
N
N
2-31