Volume Maxlab; Volume Minlab - Xerox DocuPrint 100 Software Manual

Options
Table 2-69. VOLUME LPACK parameter options and definitions
Option
NO
YES
Default
Syntax
Options
Option
value
Default

VOLUME MAXLAB

parameter: point
to note
Syntax
Using LCDS Print Description Language
Definition
Indicates that no unpacking operation will be performed.
Indicates that the labels are packed.
If YES is specified, the UNPACK parameters specify the required unpacking
method for both the labels and the input data. If the data in a report is packed,
the labels may be either packed or unpacked.
NO
VOLUME MAXLAB
Specifies the longest physical block that will be treated as a label
when an undefined label is specified (LABEL=UNDEF).
VOLUME MAXLAB = value
Table 2-70. MAXLAB parameter options and definitions
Definition
Specifies in bytes the maximum length of the longest physical block. The value
can range from 2 to 4096 bytes. The specified value must be greater than the
MINLAB value and must not exceed the BLOCK LENGTH.
81
Any data block whose length is between MINLAB and MAXLAB
(inclusive) is treated as a label.

VOLUME MINLAB

Specifies the smallest physical block that will be treated as a
label when an undefined label is specified (LABEL=UNDEF).
VOLUME MINLAB = value
Specifying input parameters
2-65