Xerox DocuPrint 100 Software Manual page 93

Using LCDS Print Description Language
• Do not omit any slashes (/). These symbols separate different
directory levels of folders in the UNIX file system. The slash
at the beginning of the command is actually the identifier or
"name" of the parent (root) directory of the file system.
• Enter all command text in lowercase letters.
NOTE: This rule does not apply to UNIX file and folder
names that contain uppercase letters. Be sure to enter any
file or folder names exactly the way they appear in the
directory. (For example, if you enter the "XRXnps" folder
name as "xrxnps," the system cannot find it.)
• Leave spaces only where the command syntax shows them;
do not add any spaces where they are not indicated.
• Italics indicate variables that you must specify. For example,
when entering a command, you would replace the word
filename with the actual name of the file.
Follow these steps to compile a JSL:
1. On the controller workspace, open a Terminal window by
following these steps:
a. Right click in the controller workspace (screen
background) to display the Workspace menu.
b. From the Workspace menu, select [Tools]. The Tools
menu is displayed next to the Workspace menu.
Figure 1-18. Selecting [Tools] from the Workspace
menu
c. Select [Terminal] from the Tools menu. A Terminal window
opens.
PDL principles and procedures
1-65