Xerox DocuPrint 100 Software Manual page 169

Default
VOLUME HOST
parameter: points
to note
Using LCDS Print Description Language
Offline printing: IBMOS
Online printing: No default
• For HOST=DUMP, two tape marks at the end of the tape are
required to dump the data tape using DUMP.JSL.
• If a selected HOST type is inconsistent with a selected
LABEL type, the PDL issues an error message and
automatically substitutes a valid label. Do not code the
LABEL parameter of the VOLUME command in cases where
it is not appropriate for a particular HOST type. Refer to the
"Offline specifications" appendix for format information.
• If an online job (JDE) is called out in an offline JDL that
changes the system default values, the job may print
incorrectly. If this happens, separate and run online and
offline jobs independently of each other.
• The following defaults are automatically selected when
VOLUME HOST=IBMONL is specified:
RECORD LENGTH = 150;
LINE PCCTYPE = IBM3211, DATA = (0,150);
• Double-byte printing:
The following host types can be used for online printing:
– 123ONL
– DBSONL: Emulates the IBM 4245 host type.
– FUJONL: Emulates the functionality of the Fujitsu F6715
and F672X printers.
– FXEONL
– HITONL: Emulates the functionality of the Hitachi H817X
printer.
– UTYONL: Emulates the IBM 4245 host type.
The following host types can be used for offline printing:
– IBMDBS: Emulates the IBMOS, IBMDOS, and MVS/ESA
host types in the label, block, and record structures.
– IBMUTY: Same as IBMDBS
– FUJITSU: Emulates the functionality of Fujitsu F6715 and
F672x printers.
– HITACHI: Emulates the functionality of Hitachi 817x
printer
Specifying input parameters
2-61